Method one

Step 1: Open the windows settings app and click on System settings

Step 2: Select the Display option

Step 3: Use the drop down option to choose Duplicate or Extend

Method 2: Keyboard Shortcut

Step 1: Press windows+p on the keyboard

Step 2: Select the appropriate display mode

To force reboot the PC press and hold the power button for 10-15 seconds. Briefly pressing the power button puts the PC to sleep but does not turn it off.

The PC has an automated self diagnostic check. Please wait 15 seconds after the PC has turned off to turn it on again. The light on the power button will glow white briefly, wait for it to turn off again.

Step 1: Press System On, then wait for the projector to finish warming up

The touch panel may be asleep displaying a black screen. Touch it to wake it up.

Step 2: Select the preferred device to project

Classrooms may have a camera on the podium monitor, a camera at the back of the room, a document camera on the podium, or any combination of all three. The document podium camera is labeled as "wolfvision" in zoom.

Step 1: Set the display mode to duplicate

The computers in CTL classrooms are set to duplicate mode by default. This means that your powerpoint slides will appear on both the projector screen and podium screen at the same time. If you wish to use presenter mode and have the powerpoint appear on one screen and notes on the other, you will need to first change the display mode from “DUPLICATE” to “EXTEND”. For more information on this step, please refer to "How to change the display mode" below.

Step 2: Check the "Use Presenter View" box

Click the slide show heading, then check the box marked "Use Presenter View"

Common Issue 1:

If the slideshow and notes appear on the wrong screens, you may need to swap the presenter view and slideshow: